Helitin R serisi Helitin R720AC(BC) 50cm folyo kesici plotter. Fiyatları ve özellikleri hakkında bizi arayınız.
| Model | R500AC(BC) | R720AC(BC) | R1350AC(BC) |
| Appearance | Desktop (without stents | With stents/ desktop | With stents |
| Max cutting width | 400mm(15inches) | 620mm (24inches) | 1250mm(49inches) |
| Max feeding width | 500mm(19inches) | 720mm(28inches) | 1350mm(53inches) |
| Drive system | stepper/servo motor | ||
| Cutting pressure | 20-500g/20-1000g (stepper/servo motor) | ||
| Max cutting speed | 20-800/1200mm/s (stepper/servo motor) | ||
| Mechanical resolution | 0.05 mm/0.1% tolerance（Max） | ||
| Offset value | 0~1.0 mm (spacing increment 0.025mm) | ||
| Mechanical resolution | 0.0125mm | ||
| Software resolution | 0.0125mm | ||
| Interfaces | USB/RS232 | ||
| Expansion port 1 | Internet access | ||
| Expansion port 2 | U disk | ||
| Command modes | HP-GL, HP-GL/2 | ||
| Compatible software | Artcut/Flexisign/Flexi Auto/coreIDRAW/Singcut | ||
| Standard set(free) | Helitin Blade holder（one）, Blade（three） | ||
| control panel | One liquid crystal display, 10 silica key, Chinese and English operation interface | ||
| Machine size (L*W*H) | 656x292x263mm | 876x292x263mm | 1506x292x263mm |
| Carton size (L*W*H) | 790x380x380mm | 1000x380x380mm | 1630x380x380mm |
| GW | 20KG | 26KG | 35KG |
| Rated power supply | 100V-240V, 50/60Hz (Auto switch) | ||
| Rated Power consumption | Max 110W | ||
| Environmental Humidity | 20% ~ 80% relative humidity | ||
| Working temperature | 0°C~45°C/32°F~125°F | ||
| Model | R500AA | R500BA | R720AA | R720BA | R1350AA | R1350BA |
| Appearance | Desktop (without stents) | With stents/ desktop | With stents | |||
| Max cutting width | 400mm(15inches) | 620mm (24inches) | 1250mm(49inches) | |||
| Max feeding width | 500mm(19inches) | 720mm(28inches) | 1350mm(53inches) | |||
| Drive system | stepper/servo motor | |||||
| Cutting pressure | 20-500g/20-1000g (stepper/servo motor) | |||||
| Max cutting speed | 20-800/1200mm/s (stepper/servo motor) | |||||
| Mechanical resolution | 0.05 mm/0.1% tolerance（Max） | |||||
| Offset value | 0~1.0 mm (spacing increment 0.025mm) | |||||
| Mechanical resolution | 0.0125mm | |||||
| Software resolution | 0.0125mm | |||||
| Interfaces | USB/RS232 | |||||
| Expansion port 1 | Internet access | |||||
| Expansion port 2 | U disk | |||||
| Command modes | HP-GL, HP-GL/2 | |||||
| Compatible software | Flexi Auto Mark | |||||
| Standard set(free) | Helitin Blade holder（one）, Blade（three） | |||||
| control panel | One liquid crystal display, 10 silica key, Chinese and English operation interface | |||||
| Machine size (L*W*H) | 656x292x263mm | 876x292x263mm | 1506x292x263mm | |||
| Carton size (L*W*H) | 790x380x380mm | 1000x380x380mm | 1630x380x380mm | |||
| GW | 20KG | 26KG | 35KG | |||
| Rated power supply | 100V-240V, 50/60Hz (Auto switch) | |||||
| Rated Power consumption | Max 110W | |||||
| Environmental Humidity | 20% ~ 80% relative humidity | |||||
| Working temperature | 0°C~45°C/32°F~125°F | |||||
